length 26" | diameter 3/8"
Construction: The core of the flow-wand is fiberglass, which is nice and heavy, extremely strong, and does not warp with humidity or temperature. We drill, bevel and clean the fiberglass and apply a special tape to give the wand its beautiful holographic finish. This step has to be done very carefully to avoid getting bubbles under the tape. We then put a layer of clear heat shrink over the whole wand to protect the tape and prevent it from peeling off in humid weather. The hole is finished with handtools and tiny clear caps finish the ends and ensure that no fiberglass is exposed.
Wand string and swivel finger loop: Flow-wand string is made with very durable braided teflon-coated nylon ice fishing line.
If your string breaks for any reason, you can replace it easily with extra string from us, or any strong button or upholstery thread or braided fishing line. You can also use invisible thread or fishing line if you wish. We have found that "clear" string often appears more visible as it catches and reflects the light. It's also less comfortable and gets tangled easily, but there might be occasions where it's appropriate. Feel free to experiment!