12 Item(s)

  • short tubes: 1F to 5F

    Regular Price:

    $5.00

    Get different length tubes to convert your flowtoys into other poi, staffs, martial art tools and more. 

    Tube lengths are determined by the number of flowlights, capsule lights and/or connectors they hold.

    • F = flowlight, e.g. a 2F tube holds 2 flowlights. F does not stand for feet!
    • C = capsule light, e.g. a 2C tube holds 2 capsules
    • 0.5F = if using staff connectors - 0.5F for each half that goes into a tube
    • X = space for a compression connector - if you're getting a tube for a composite staff end, you'll want a 'CX' or 'FX' tube

  • long tubes: 6F to 13F

    Regular Price:

    $10.00

    Get different size tubes to make different length staffs!

    Note: Tubes are measured in flowlight lengths, e.g. 12F tube holds 12 flowlights. 'F' does not stand for 'feet. See "tech specs" for staff lengths with flowcaps.

  • 15mm compression connector - single

    Regular Price:

    $10.00

    Need to replace the compression connectors on your composite contact staff or flowstaff? Or want to get a different color connector? Now you can!

    These are 3D-printed to fit a 15mm flowtoys composite staff with grip. Be sure to get the right size connector - if you aren't sure, remove the tube from your staff end, and check out the top of your current connector. If you see 4 dots, you've got a 12mm shaft, and if you see 6, you've got a 15mm.

    Each set forms a single compression connector - for one end of a staff. To replace the compression connectors for both ends of your staff, please order 2 sets.

  • 12mm compression connector - single

    Regular Price:

    $10.00

    Need to replace the compression connectors on your iso or lumina twirl batons, flower stick or contact wand? Or want to get a different color connectors? Now you can!

    These are 3D-printed to fit a 12mm flowtoys composite staff with grip. Be sure to get the right size connector - if you aren't sure, remove the tube from your staff end, and check out the top of your current connector. If you see 4 dots, you've got a 12mm shaft, and if you see 6, you've got a 15mm.

    Each set forms a single compression connector - for one end of your prop. To replace the compression connectors for both ends of your prop, please order 2 sets.

  • 12mm elastomer grip tube - by the foot

    Regular Price:

    $3.00

    Custom elastomer tubing that you can install on your 12mm shafts to make them grippy. 

    Sold by the foot. "Qty=1" means you get 1 foot of 12mm grip tube.

  • 15mm elastomer grip tube - by the foot

    Regular Price:

    $3.00

    Quality elastomer tubing that you can install on 15mm shafts to make them grippy. 

    Sold by the foot. "Qty=1" means you get 1 foot of 15mm grip tube.

  • 1" elastomer grip tube - by the foot

    Regular Price: $5.00

    Special Price $4.00

    Quality elastomer tubing that you can install on your flowtoys or other 1" tubing to make them grippy. 

    Sold by the foot. If you choose "Qty=1", you get 1 foot of grip tube.

  • anti-vibration & diffusion kit

    Regular Price:

    $10.00

    Sensitive to rattling in your props? Install this kit in your flowtoys tube to soften any rattle the lights may make on drops and catches, and diffuse your light's LEDs to a softer glow.

  • cord connector

    Regular Price:

    $10.00

    The cord connector creates a secure flexible connection between leashcord and tube. Comes w/ 2 screws. Sold individually.

    Appropriate for use with flowcord and phatty cord. If you are using flowcord, you will want to use a washer in addition to a knot to create a secure finish.

  • linked cord connectors kit

    Regular Price:

    $20.00

    Create a strong, secure flexible connection between any 2 flowtoys tubes, for a variety of props. 

    The connecting phatty cord is 12" and adjustable. If you're using thinner cord, you may need to add a washer to retain the cord. Some assembly required.

  • staff connector

    Regular Price:

    $5.00

    Staff connectors have integrated snap buttons that connect any 2 flowtoys tubes. The connectors are made of polycarbonate, the strongest clear plastic available, and have built-in suspension that cushions flowlights for high impacts.

  • contact staff handle w/ grip and woodcore

    Regular Price:

    $20.00

    We offer a variety of "contact staff handle" tube lengths. These tubes come with an internal woodcore that makes the staff stiffer and has clear elastomer grip to make the handle grippy. Sold individually.

    Contact staff handles are measured in flowlight lengths (denoted 'F'). 'F' does not stand for feet.


12 Item(s)