Comes with:
- 2x pop'n flow poi hubs with 10mm FPC cord and silicone uni knob handles
- 2x full vision pop'n flow spokes
- 2x usb cables + charger
- 1x flowtoys bag
Cap options:
- Custom 3D-printed spoke air caps are the lightest weight option - excellent for fans, triads and fast lightweight poi.
- Flowcaps are made of silicone and heavier - good for props like dragonstaffs, batons, stick-poi and chucks.
- Pod shell + pod sleeve: If you like your poi really heavy, you'll want to choose the pod shell and pod sleeve.
Tech specs
Weight/ poi head:
- w/ air caps = 110g
- w/ flowcaps = 130g
- w/ pod shell + sleeve = 225g
Length:
- head = 31cm (12.25")
- total w/ leash and knob = ~66cm (26")
Width:
- hub = 22mm diameter
- spoke = 25mm/16mm
- air cap = 35mm
- flowcap = 39cm
- pod shell = 67mm
Custom lengths:
We do our best to match your requested length exactly, though some variation cannot be reasonably avoided. Poi leash tends to shrink a little over time - we aim to meet your requested length at a minimum, and it could be ~5mm longer. We take extra care to ensure that all poi in a set are as close to the same length as possible, though ~2mm variation is possible.
If you require tighter tolerance, we recommend you purchase enough leash to make at least two attempts yourself. Making very small adjustments to the leash length is very difficult, because the melted end breaks down with re-heating and needs to be cut off, which makes the lash at least 5mm shorter. Since the leash can shrink by more than that over time, we recommend you start a bit longer.
Small variation in leash length is hard to feel/notice, and the lengths of all poi in a set matching is more important than the overall length of the set.
Bridge for connecting to the app:
Want to use the flowtoys connect app? You'll need a small hardware bridge to enable your props to talk to your mobile device and vice versa.
We have 2 options for bridges:
- Pocket bridge comes with its own power bank and can be used when you're out and about.
- USB bridge is great for home use. Just plug into power via usb.
You can find out more about the app and bridge here.
Optimize your flowtoys experience ::
Reviews
