Spin-all-the-things mega kaizen

$255.00

The ultimate prop rack! This kit is the spin-all-the-things starter with every add-on and holds just about everything you can throw at it, and you get it at a discount compared to ordering parts separately. If you fill this kit up, you’re awesome! and maybe your housemates need to get their own racks ;D If hoops and fans are a major factor, consider getting the “diamond hooks” for them, so you can fit more of the rest of your props on this mega rack.

Sold as a kit, assembly required. Props not included ;)

1-week Lead time: All kaizen kits have a 1-week lead time. Even if you order Express shipping, your order might not leave our workshop until a week after you place your order.

Comes with

1 x hexagon base
1 x power bin
1 x 6-fork deep
2 x deep fork
1 x over the top w/ stick steps wide + 2 deep hooks
1 x down low w/ toy bin
2 x hooks (4-pack)
1 x parts bin

* Required

Qty

What You'll Get

What you get:

1x hexagon base w/ wall anchors, screw spacers and sandpaper
1x power bin
1x parts bin
1x 6-fork deep
2x deep forks
8x hooks
1x over-the-top + stick-steps + 2 deep hooks
1x down-low w/ toy bin
the ultimate prop rack to organize, display and charge all your props and more!

Features & Tech Specs

Features

modular, versatile and expandable prop rack system
lasercut cherrywood

Tech Specs

Base

3 x Hexagons: 348mm wide x 303mm tall

Bins & Mounts

Power bin: internal dimensions: 144mm tall x 256mm deep x 256mm wide
6-fork deep: 23mm wide x 175mm deep
Deep forks: 23mm wide x 240mm deep
Over-the-top: 347mm long. 1 pair creates maximum 196mm gap between bases. 2 pairs + hex base creates maximum 695mm gap between 2 hex bases. NOTE: must overlap at least 1 slot on bottom base or that base will sag forward when weigth is applied to any mounts or bins.
Stick-steps: 227mm depth to base. 144mm heigh.175mm width. 32mm max shaft diameter.
Down-low: 347mm long. creates 37mm gap between 2 hex bases
Toy bin: internal dimensions: 144mm tall x 256mm deep x 256mm wide
Hooks: 70mm depth to base. hole in object to be hung must be minimum 20mm.

What do the mounts hold?

6-fork deep: Ideal for lots of sticks, or a wide variety of props in a very tight space. Each of the 6 forks holds 3-5 sticks, 3+ poi, 3 clubs, and whatever fits. However, becasue they are close together, wide objects like clubs and contact poi cannot fit nicely in all 6 slots without being staggered in some way, so the total capacity may be 30 sticks with ends the size of flowcaps, but only 9 clubs, 9+ contact poi (depending on if they are the same length, or if you hang some with the head on top you can fit more without it getting messy) NOTE: requires power bin. Does not directly fit on bases.

Deep forks: Ideal for mounting sticks, poi and/or clubs on the sides of your power bin. Holds 3-5 sticks, 3+ poi, 3 clubs, or whatever fits. NOTE: requires power bin. Does not directly fit on bases.

Over the top w/ stick steps & deep hooks: Over-the-top connectors allow you to add another hexagon above your base without you having to screw it into the wall. Another set of stick-steps and deep hooks expand your stick storing capacity.

Down-low w/ toy bin: Down-low connectors allow you to add another hexagon below your base without having to screw it into the wall. The toy bin is ideal for small props toys and parts that don't fit on your rack. Most mounts can also be added to the bin, but because of its size, and depending on how its base is attached, it's fairly easy to overload it. Don't expect a "6-fork deep" with 30 staves on it to hold up very well ;)

Hooks: Ideal for hooking things ;) dart, chucks, astrojax, poi loops, headphones, a remote etc. 2 of these next to each other also nicely hold a single staff or a few wands horizontally.

Options

Optimize your flowtoys experience ::

back to the top